Effects of carbon concentration and filament number on advanced internal-Mg-infiltration-processed MgB2 Strands
arXiv:1307.1150
Abstract
An advanced internal Mg infiltration method (AIMI) in this paper has been shown to be effective in producing superconducting wires containing dense MgB2 layers with high critical current densities. In this study, the in-field critical current densities of a series of AIMI-fabricated MgB2 strands were investigated in terms of C doping levels, heat treatment (HT) time and filament numbers. The highest layer Jc for our monofilamentary AIMI strands is 1.5 x 10^5 A/cm2 at 10 T, 4.2 K, when the C concentration was 3 mol% and the strand was heat-treated at 675 °C for 4 hours. Transport critical currents were also measured at 4.2 K on short samples and one-meter segments of eighteen-filament C-doped AIMI strands. The layer Jcs reached 4.3 x 10^5 A/cm2 at 5 T and 7.1 x 10^4 A/cm2 at 10 T, twice as high as those of the best PIT strands. The analysis of these results indicates that the AIMI strands, possessing both high layer Jcs and engineering Jes after further optimization, have strong potential for commercial applications.
arXiv comment15 pages, 2 tables, 8 figures (to be published in Supercond. Sci. Technol.)
References in corpus (5)
- Systematic effects of carbon doping on the superconducting properties of Mg(BC)
- Substitution induced pinning in MgB_2 superconductor doped with SiC nano-particles
- Nanoscale-SiC doping for enhancing Jc and Hc2 in the Superconducting MgB2
- Superconductivity, critical current density, and flux pinning in MgB_{2-x}(SiC)_{x/2} superconductor after SiC nanoparticle doping
- Critical Current Density and n-values of MgB2 Strands over a Wide Range of Temperatures and Fields