paper

Passive Self-Interference Suppression for Full-Duplex Infrastructure Nodes

arXiv:1302.2185 · doi:10.1109/TWC.2013.010214.130226

Abstract

Recent research results have demonstrated the feasibility of full-duplex wireless communication for short-range links. Although the focus of the previous works has been active cancellation of the self-interference signal, a majority of the overall self-interference suppression is often due to passive suppression, i.e., isolation of the transmit and receive antennas. We present a measurement-based study of the capabilities and limitations of three key mechanisms for passive self-interference suppression: directional isolation, absorptive shielding, and cross-polarization. The study demonstrates that more than 70 dB of passive suppression can be achieved in certain environments, but also establishes two results on the limitations of passive suppression: (1) environmental reflections limit the amount of passive suppression that can be achieved, and (2) passive suppression, in general, increases the frequency selectivity of the residual self-interference signal. These results suggest two design implications: (1) deployments of full-duplex infrastructure nodes should minimize near-antenna reflectors, and (2) active cancellation in concatenation with passive suppression should employ higher-order filters or per-subcarrier cancellation.

16 pages, Accepted by IEEE Transactions on Wireless Communication, October 2013

References in corpus (3)

Cited by in corpus (33)