First results from a next-generation off-plane X-ray diffraction grating

Abstract

Future NASA X-ray spectroscopy missions will require high throughput, high resolution grating spectrometers. Off-plane reflection gratings are capable of meeting the performance requirements needed to realize the scientific goals of these missions. We have identified a novel grating fabrication method that utilizes common lithographic and microfabrication techniques to produce the high fidelity groove profile necessary to achieve this performance. Application of this process has produced an initial pre-master that exhibits a radial (variable line spacing along the groove dimension), high density (>6000 grooves/mm), laminar profile. This pre-master has been tested for diffraction efficiency at the BESSY II synchrotron light facility and diffracts up to 55% of incident light into usable spectral orders. Furthermore, tests of spectral resolving power show that these gratings are capable of obtaining resolutions well above 1300 ($\lambda /\Delta \lambda$) with limitations due to the test apparatus, not the gratings. Obtaining these results has provided confidence that this fabrication process is capable of producing off-plane reflection gratings for the next generation of X-ray observatories.

17 pages, 10 figures, Submitted to Experimetal Astronomy

References in corpus (1)

• Soft X-ray Spectroscopy of the Cygnus Loop Supernova Remnant

Cited by in corpus (12)

• Extreme Ultraviolet and Soft X-Ray Diffraction Efficiency of a Blazed Reflection Grating Fabricated by Thermally Activated Selective Topography Equilibration
• Demonstration of resolving power $\lambda /\Delta \lambda >10,000$ for a space-based x-ray transmission grating spectrometer
• Critical-angle x-ray transmission grating spectrometer with extended bandpass and resolving power > 10,000
• Analytical Alignment Tolerances for Off-Plane Reflection Grating Spectroscopy
• Fabrication of astronomical x-ray reflection gratings using thermally activated selective topography equilibration
• The Use of Laterally Graded Multilayer Mirrors for Soft X-ray Polarimetry
• A new benchmark of soft X-ray transition energies of Ne, CO${}_2$, and SF${}_6$: paving a pathway towards ppm accuracy
• X-ray Hybrid CMOS Detectors: Recent Development and Characterization Progress
• X-ray verification of sol-gel resist shrinkage in substrate-conformal imprint lithography for a replicated blazed reflection grating
• Optimization methods for achieving high diffraction efficiency with perfect electric conducting gratings
• Design study of a photon beamline for a soft X-ray FEL driven by high gradient acceleration at EuPRAXIA@SPARC_LAB
• Generating Electron Beam Lithography Write Parameters from the FORTIS Holographic Grating Solution