Optimal operating points of oscillators using nonlinear resonators
arXiv:1211.1088 · doi:10.1103/PhysRevE.86.056207
Abstract
We demonstrate an analytical method for calculating the phase sensitivity of a class of oscillators whose phase does not affect the time evolution of the other dynamic variables. We show that such oscillators possess the possibility for complete phase noise elimination. We apply the method to a feedback oscillator which employs a high Q weakly nonlinear resonator and provide explicit parameter values for which the feedback phase noise is completely eliminated and others for which there is no amplitude-phase noise conversion. We then establish an operational mode of the oscillator which optimizes its performance by diminishing the feedback noise in both quadratures, thermal noise, and quality factor fluctuations. We also study the spectrum of the oscillator and provide specific results for the case of 1/f noise sources.
References in corpus (4)
Cited by in corpus (19)
- Surpassing fundamental limits of oscillators using nonlinear resonators
- Mesoscopic physics of nanomechanical systems
- Phase-Locked Loop based Resonant Sensors: A Rigorous Theory and General Analysis Framework for Deciphering Fundamental Sensitivity Limitations due to Noise
- Nonlinear Nanomechanical Mass Spectrometry at the Single-Nanoparticle Level
- Non-equilibrium steady state of a driven levitated particle with feedback cooling
- Resolution Limits of Resonant Sensors with Duffing Non-Linearity
- Understanding Fundamental Tradeoffs in Nanomechanical Resonant Sensors
- Cubic singularities in binary linear electromechanical oscillators
- Spin detection via parametric frequency conversion in a membrane resonator
- Systematic Synthesis and Design of Ultra-Low Threshold Parametric Frequency Dividers
- Frequency stabilization of self-sustained oscillations in a sideband-driven electromechanical resonator
- Phase noise of oscillators with unsaturated amplifiers
- Suppressing Frequency Fluctuations of Self-Sustained Vibrations in Underdamped Nonlinear Resonators
- Method to Determine the Closed-Loop Precision of Resonant Sensors from Open-Loop Measurements
- On the effect of linear feedback and parametric pumping on a resonators frequency stability
- Determining the source of phase noise: Response of a driven Duffing oscillator to low-frequency damping and resonance frequency fluctuations
- Frequency Precision of Oscillators Based on High-Q Resonators
- Frequency Stability of Graphene Nonlinear Parametric Oscillator
- High Stability Mechanical Frequency Sensing beyond the Linear Regime