SWIPE: a bolometric polarimeter for the Large-Scale Polarization Explorer
arXiv:1208.0282 · doi:10.1117/12.926569
Abstract
The balloon-borne LSPE mission is optimized to measure the linear polarization of the Cosmic Microwave Background at large angular scales. The Short Wavelength Instrument for the Polarization Explorer (SWIPE) is composed of 3 arrays of multi-mode bolometers cooled at 0.3K, with optical components and filters cryogenically cooled below 4K to reduce the background on the detectors. Polarimetry is achieved by means of large rotating half-wave plates and wire-grid polarizers in front of the arrays. The polarization modulator is the first component of the optical chain, reducing significantly the effect of instrumental polarization. In SWIPE we trade angular resolution for sensitivity. The diameter of the entrance pupil of the refractive telescope is 45 cm, while the field optics is optimized to collect tens of modes for each detector, thus boosting the absorbed power. This approach results in a FWHM resolution of 1.8, 1.5, 1.2 degrees at 95, 145, 245 GHz respectively. The expected performance of the three channels is limited by photon noise, resulting in a final sensitivity around 0.1-0.2 uK per beam, for a 13 days survey covering 25% of the sky.
arXiv commentIn press. Copyright 2012 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited
References in corpus (14)
- HEALPix -- a Framework for High Resolution Discretization, and Fast Analysis of Data Distributed on the Sphere
- Cosmological parameters from CMB and other data: a Monte-Carlo approach
- Component separation methods for the Planck mission
- Planck early results: first assessment of the High Frequency Instrument in-flight performance
- Lensed CMB power spectra from all-sky correlation functions
- How to measure CMB polarization power spectra without losing information
- SPIDER: Probing the Early Universe with a Suborbital Polarimeter
- Characterization of the BICEP Telescope for High-Precision Cosmic Microwave Background Polarimetry
- QUBIC: The QU Bolometric Interferometer for Cosmology
- A Cosmic Microwave Background Radiation Polarimeter Using Superconducting Bearings
- Spider Optimization: Probing the Systematics of a Large Scale B-Mode Experiment
- A cryogenic waveplate rotator for polarimetry at mm and sub-mm wavelengths
- Polypropylene Embedded Metal-Mesh Broadband Achromatic Half Wave Plate for Millimeter Wavelengths
- Forecast B-modes detection at large scales in presence of noise and foregrounds
Cited by in corpus (15)
- The large scale polarization explorer (LSPE) for CMB measurements: performance forecast
- Ultra High Molecular Weight Polyethylene: optical features at millimeter wavelengths
- Development of large radii half-wave plates for CMB satellite missions
- Multi-mode TES bolometer optimization for the LSPE-SWIPE instrument
- Multi-Clustering Needlet-ILC for CMB B-modes component separation
- A coherent polarimeter array for the Large Scale Polarization Explorer balloon experiment
- Progress report on the Large Scale Polarization Explorer
- Efficient ILC analysis on polarization maps after EB leakage correction
- QUBIC VI: cryogenic half wave plate rotator, design and performances
- Needlet thresholding methods in component separation
- The STRIP instrument of the Large Scale Polarization Explorer: microwave eyes to map the Galactic polarized foregrounds
- CMB polarization analysis on circular scans
- Cold-electron bolometers for future mm and sub-mm sky surveys
- Winter long duration stratospheric balloons from Polar regions
- Forecast analysis and focal plane optimization for a multi-frequency CMB B-modes polarization experiment: the case of LSPE