Experiments on centimeter-sized dust aggregates and their implications for planetesimal formation
arXiv:1207.3669 · doi:10.1051/0004-6361/201219099
Abstract
The first macroscopic bodies in protoplanetary disks are dust aggregates. We report on a number of experimental studies with dust aggregates formed from micron-size quartz grains. We confirm in laboratory collision experiments an earlier finding that producing macroscopic bodies by the random impact of sub-mm aggregates results in a well-defined upper-filling factor of 0.31 \pm 0.01. Compared to earlier experiments, we increase the projectile mass by about a factor of 100. The collision experiments also show that a highly porous dust-aggregate can retain its highly porous core if collisions get more energetic and a denser shell forms on top of the porous core. We measure the mechanical properties of cm-sized dust samples of different filling factors between 0.34 and 0.50. The tensile strength measured by a Brazilian test, varies between 1 kPa and 6 kPa. The sound speed is determined by a runtime measurement to range between 80 m/s and 140 m/s while Young's modulus is derived from the sound speed and varies between 7MPa and 25MPa. The samples were also subjected to quasi-static omni- and uni-directional compression todetermine their compression strengths and flow functions. Applied to planet formation, our experiments provide basic data for future simulations, explain the specific collisional outcomes observed in earlier experiments, and in general support a scenario where collisional growth of planetesimals is possible.
References in corpus (16)
- Catastrophic disruptions revisited
- Planetesimal formation by sweep-up: How the bouncing barrier can be beneficial to growth
- Low-velocity collisions of centimeter-sized dust aggregates
- The Physics of Protoplanetesimal Dust Agglomerates. IV. Towards a Dynamical Collision Model
- Thermal conductivity measurements of porous dust aggregates: I. Technique, model and first results
- Collisions between equal sized ice grain agglomerates
- Porosities of Protoplanetary Dust Agglomerates from Collision Experiments
- The Physics of Protoplanetesimal Dust Agglomerates. V. Multiple Impacts of Dusty Agglomerates at Velocities Above the Fragmentation Threshold
- Impact Angle Influence in High Velocity Dust Collisions during Planetesimal Formation
- Collisions of inhomogeneous pre-planetesimals
- Compression Behaviour of Porous Dust Agglomerates
- Numerical Simulations of Highly Porous Dust Aggregates in the Low-Velocity Collision Regime
- Decimetre dust aggregates in protoplanetary discs
- Numerical determination of the material properties of porous dust cakes
- The four-populations model: a new classification scheme for pre-planetesimal collisions
- Thermal and Photophoretic Properties of Dust Mantled Chondrules and Sorting in the Solar Nebula
Cited by in corpus (30)
- Erosion and the limits to planetesimal growth
- The thermal, mechanical, structural, and dielectric properties of cometary nuclei after Rosetta
- Disintegrating Asteroid P/2013 R3
- Sticking Properties of Silicates in Planetesimal Formation Revisited
- New developments for modern celestial mechanics. I. General coplanar three-body systems. Application to exoplanets
- Experimental Study on Bouncing Barriers in Protoplanetary Disks
- Preplanetary scavengers: Growing tall in dust collisions
- Understanding planet formation using microgravity experiments
- Tensile Strength of Porous Dust Aggregates
- Macroscopic Dust in Protoplanetary Disks - From Growth to Destruction
- The tensile strength of dust aggregates consisting of small elastic grains: Constraints on the size of condensates in protoplanetary disks
- Colliding Decimetre Dust
- Failed Growth at the Bouncing Barrier in Planetesimal Formation
- Drifting inwards in protoplanetary discs II: The effect of water on sticking properties at increasing temperatures
- Sticky or not sticky? Measurements of the tensile strength of micro-granular organic materials
- Ice aggregate contacts at the nm-scale
- Tensile & shear strength of porous dust agglomerates
- Radiative forces on macroscopic porous bodies in protoplanetary disks: laboratory experiments
- A Smoking Gun for Planetesimal Formation: Charge Driven Growth into a New Size Range
- The Physics of Protoplanetesimal Dust Agglomerates. X. Mechanical properties of dust aggregates probed by a solid-projectile impact
- The footprint of cometary dust analogs: I. Laboratory experiments of low-velocity impacts and comparison with Rosetta data
- The tensile strength of compressed dust samples and the catastrophic disruption threshold of pre-planetary matter
- Drifting inwards in protoplanetary discs I Sticking of chondritic dust at increasing temperatures
- A quantitative description of comet 67P's dust and gas production remains enigmatic
- Photophoresis boosts giant planet formation
- Selective Aggregation Experiments on Planetesimal Formation and Mercury-Like Planets
- Measurement of mass by optical forced oscillation of absorbing particles trapped in air
- On the elastoplastic behavior in collisional compression of spherical dust aggregates
- Clusters of tribocharged dust aggregates as pebbles in protoplanetary disks
- VLT spectropolarimetry of comet 67P: Dust environment around the end of its intense Southern summer