Drawing induced texture and the evolution of superconductive properties with heat treatment time in powder-in-tube in-situ processed MgB2 strands
arXiv:1109.4517 · doi:10.1088/0953-2048/25/6/065002
Abstract
Monocore powder-in-tube MgB2 strands were cold-drawn and heat-treated at 600C and 700C for times of up to 71 hours and structure-property relationships examined. Drawing-induced elongation of the Mg particles led, after HT, to a textured macrostructure consisting of elongated polycrystalline MgB2 fibers separated by elongated pores. The superconducting Tc, Jc and Fp were correlated with the macrostructure and grain size. Grain size increased with HT time at both 600C and 700C. Jc and hence Fp decreased monotonically but not linearly with grain size. Overall, it was observed that at 700C, the MgB2 reaction was more or less complete after as little as 30 min; at 600C, full reaction completion did not occur until 71 h. into the HT. Transport, Jct(B) was measured in a perpendicular applied field, and the magnetic critical current densities, Jcm\bot(B) and Jcmϕ(B), were measured in perpendicular and parallel (axial) applied fields, respectively. Particularly noticeable was the premature dropoff of Jcm\bot(B) at fields well below the irreversibility field of Jct(B). This effect is attributed to the fibrous macrostructure and its accompanying anisotropic connectivity. Magnetic measurements with the field directed along the strand axis yielded a critical density, Jcm\bot(B), for current flowing transversely to the strand axis that was less than and dropped off more rapidly than Jct(B). In the conventional magnetic measurement, the loop currents that support the magnetization are restricted by the lower of Jct(B) and Jcmϕ (B). In the present case the latter, leading to the premature dropoff of the measured Jcm(B) compared to Jct(B) with increasing field. This result is supported by Kramer plots of the Jcmϕ (B) and Jct(B) data which lead to an irreversibility field for transverse current that is very much less than the usual transport-measured longitudinal one, Birr,t.
arXiv comment41 pages, 14 figures
References in corpus (17)
- Strongly linked current flow in polycrystalline forms of the new superconductor MgB2
- Systematic effects of carbon doping on the superconducting properties of Mg(BC)
- Prospects for Improving the Intrinsic and Extrinsic Properties of Magnesium Diboride Superconducting Strands
- High performance new MgB2 superconducting hollow wires
- High transport currents in mechanically reinforced MgB2 wires
- Effect of lattice strain and defects on the superconductivity of MgB2
- Large Upper Critical Field and Irreversibility Field in MgB2 wires with SiC additions
- Direct observation of nm-scale Mg- and B-oxide phases at grain boundaries in MgB2
- Strong Pinning Enhancement in MgB2 Using Very Small Dy2O3 Additions
- Doping Effect of Nano-Diamond on Superconductivity and Flux Pinning in MgB2
- Increases in the Irreversibility Field and the Upper Critical Field of Bulk MgB2 by ZrB2 Addition
- Carbon Doping of MgB2 by Toluene and Malic-Acid-in-Toluene
- The effect of sample size on field dependence of Jc for MgB2 superconductor
- On the sample size dependence of the critical current density in MgB superconductors
- Improved critical current densities in MgB2 tapes with ZrB2 doping
- Measuring the Penetration Depth Anisotropy in MgB using Small-Angle Neutron Scattering
- In-situ high energy synchrotron X-ray diffraction investigation of the MgB2 phase formation and MgB2 tapes sintering