Carbon Doping of MgB2 by Toluene and Malic-Acid-in-Toluene
arXiv:1010.0925 · doi:10.1016/j.physc.2010.12.005
Abstract
The decomposition of malic acid in the presence of Mg and B was studied using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) which revealed that malic acid reacted with Mg but not B. Also, the addition of toluene to dissolve malic acid followed by subsequent drying resulted in no reaction with Mg, indicating that the malic acid had decomposed during the dissolution/drying stage. The total carbon contributed by toluene versus a toluene/5 wt% malic acid mixture was measured using a LECO CS600 carbon analyzer. The toluene sample contained ~0.4 wt% C while the toluene/malic acid mixture had ~1.5 wt% C, demonstrating that the toluene contributed a significant amount of carbon to the final product. Resistivity measurements on powder-in-tube MgB2 monofilamentary wires established that the toluene/malic acid doped sample had the highest Bc2. However, the toluene-only sample had the highest transport Jc over most of the magnetic field range (0-9 T), equaled only by that of toluene/malic acid sample in fields above 9 T.
arXiv comment17 pages, 6 figures, 1 table
References in corpus (1)
Cited by in corpus (3)
- Drawing induced texture and the evolution of superconductive properties with heat treatment time in powder-in-tube in-situ processed MgB2 strands
- Influence of Strand Design, Boron Type, and Carbon Doping Method on the Transport Properties of Powder-in-Tube MgB2-XCX Strands
- Effect of Underlayer Induced Charge Carrier Substitution on the Superconductivity of Ti40V60 Alloy Thin Films