Anisotropic Connectivity and its Influence on Critical Current Densities, Irreversibility Fields, and Flux Creep in In-Situ-Processed MgB2 Strands
arXiv:1001.1030 · doi:10.1088/0953-2048/23/4/045018
Abstract
The anisotropy of the critical current density (Jc) and its influence on measurement of irreversibility field (Birr) has been investigated for high quality, in-situ MgB2 strands. Comparison of transport and magnetization measurements has revealed the onset of a regime where large differences exist between transport and magnetically measured values of the critical current density and Birr. These effects, initially unexpected due to the lack of crystalline texture in these in-situ processed strands, appear to be due to a fibrous microstructure, connected with the details of the wire fabrication and MgB2 formation reactions. Scanning electron micrographs of in-situ-processed MgB2 monocore strands have revealed a fibrous microstructure. Grains (~100 nm) are randomly oriented, and there is no apparent local texture of the grains. However, this randomly oriented polycrystalline material has a fibrous texture at a larger length scale, with stringers of MgB2 (~ 60 μm long and ~5 μm in diameter) partially separated by elongated pores -- the spaces previously occupied by stringers of elemental Mg. This leads to an interpretation of the differences observed in transport and magnetically determined critical currents, in particular a large deviation between the two at higher fields, in terms of different transverse and longitudinal connectivities within the strand. The different values of connectivity also lead to different resistive transition widths, and thus irreversibility field values, as measured by transport and magnetic techniques. Finally, these considerations are seen to influence estimated pinning potentials for the strands.
arXiv comment43 Pages, 11 Figures, accepted by Supercon. Sci. Tech
References in corpus (20)
- Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping
- Thin Film Magnesium Boride Superconductor with Very High Critical Current Density and Enhanced Irreversibility Field
- Enhancement of the high-field critical current density of superconducting MgB2 by proton irradiation
- High-field superconductivity in alloyed MgB2 thin films
- High current-carrying capability in c-axis-oriented superconducting MgB2 thin films
- Prospects for Improving the Intrinsic and Extrinsic Properties of Magnesium Diboride Superconducting Strands
- Electronic anisotropy, magnetic field-temperature phase diagram and their dependence on resistivity in c-axis oriented MgB2 thin films
- Current percolation and anisotropy in polycrystalline MgB
- Large Upper Critical Field and Irreversibility Field in MgB2 wires with SiC additions
- Anisotropic superconducting properties of aligned MgB2 crystallites
- Determination of superconducting anisotropy from magnetization data on random powders as applied to LuNiBC, YNiBC and MgB
- Fabrication of high performance MgB2 wires by an internal Mg diffusion process
- Upper critical field and irreversibility line in superconducting MgB_2
- Influence of the upper critical field anisotropy on the transport properties of polycrystalline MgB
- Significant enhancement of irreversibility field in clean-limit bulk MgB2
- Thermally-activated current transport in MgB_2 films
- Flux dynamics and vortex phase diagram of the new superconductor
- Increases in the Irreversibility Field and the Upper Critical Field of Bulk MgB2 by ZrB2 Addition
- Significant improvement of flux pinning and irreversibility field in nano-Carbon doped MgB2 superconductor
- Connectivity and Critical Currents in Polycrystalline MgB2