Drag and lift forces on a counter-rotating cylinder in rotating flow

Abstract

Results are reported of an experimental investigation into the motion of a heavy cylinder free to move inside a water-filled drum rotating around a horizontal axis. The cylinder is observed to either co- or, counter intuitively, counter-rotate with respect to the rotating drum. The flow was measured with particle image velocimetry (PIV), and it was found that the inner cylinder significantly altered the bulk flow field from the solid-body rotation found for a fluid filled drum. In the counter-rotation case, the generated lift force allowed the cylinder to freely rotate without contact with the drum wall. Drag and lift coefficients of the freely counter-rotating cylinder were measured over a wide range of Reynolds numbers, 2,500 $<$ Re $<$ 25,000, dimensionless rotation rates, 0.0$<\alpha <$1.2, and gap to cylinder diameter ratios 0.003 $<G/2a<$ 0.5. Drag coefficients were consistent with previous measurements on a cylinder in a uniform flow. However, for the lift coefficient considerable larger values were observed in the present measurements. We found the enhancement of the lift force to be mainly caused by the vicinity of the wall.

Cited by in corpus (5)

• The Twente turbulent Taylor-Couette (T3C) facility: Strongly turbulent (multiphase) flow between two independently rotating cylinders
• Applying Laser Doppler Anemometry inside a Taylor-Couette geometry - Using a ray-tracer to correct for curvature effects
• Wall forces on a sphere in a rotating liquid-filled cylinder
• Role of viscous friction in the reverse rotation of a disk
• Spinning rigid bodies driven by orbital forcing: The role of dry friction