Progress on large area GEMs
arXiv:0909.5039 · doi:10.1088/1748-0221/4/12/P12009
Abstract
In 2008, a triple GEM detector prototype with an area of ~2000 cm2 has been constructed, based on foils of 66*66 cm. GEMs of such dimensions had not been made before, and innovations to the existing technology were introduced to build this detector. This paper discusses these innovations and presents further work on large area GEM development. A single-mask technique overcomes the cumbersome practice of alignment of two masks, which limits the achievable lateral size. The holes obtained with this technique are conical, and have a so-called rim, a small insulating clearance around the hole in the substrate. Further refinements of this technique allow greater control over the shape of holes and the size of rims. Also, an improvement in homogeneity over large areas is expected. Simulation studies have been done to examine the effect of hole shape on the behavior of GEMs. Such studies can help understanding how to use new enhancements of the technique to optimize performance. Many potential applications for large area GEMs foresee large production volumes. Production issues have been studied, and single-mask GEMs turn out to be much more suitable for large scale production than standard GEMs.
arXiv commentContribution to the MPGD'09 conference, Crete, Greece
References in corpus (3)
Cited by in corpus (16)
- Progress on large area GEMs (VCI 2010)
- A Time Projection Chamber for High-Rate Experiments: Towards an Upgrade of the ALICE TPC
- Characterization of GEM Detectors for Application in the CMS Muon Detection System
- Large Size GEM for Super Bigbite Spectrometer (SBS) Polarimeter for Hall A 12 GeV program at JLab
- Layout and Assembly Technique of the GEM Chambers for the Upgrade of the CMS First Muon Endcap Station
- Performance of prototype GE1/1 chambers for the CMS muon spectrometer upgrade
- Recent Advances in Bubble-Assisted Liquid Hole Multipliers in Liquid Xenon
- Performance in Test Beam of a Large-area and Light-weight GEM detector with 2D Stereo-Angle (U-V) Strip Readout
- Study of charging-up effect for a single mask triple GEM detector
- Development, Characterization and Qualification of first GEM foils produced in India
- GEM-based beam profile monitors for the antiproton decelerator
- Production and validation of industrially produced large-sized GEM foils for the Phase-2 upgrade of the CMS muon spectrometer
- Techniques for mass production of large-sized GEM foil by the Korean CMS group for CMS phase-2 upgrade
- A new technique to establish the uniformity of the induction gap in GEM based detector
- Deployment of the readout electronics for the BESIII Cylindrical GEM Inner Tracker
- The Qualification of GEM detector and its application to Imaging