Development of wavelength shifter coated reflectors for the ArDM argon dark matter detector

Abstract

To optimise the design of the light readout in the ArDM 1-ton liquid argon dark matter detector, a range of reflector and WLS coating combinations were investigated in several small setups, where argon scintillation light was generated by radioactive sources in gas at normal temperature and pressure and shifted into the blue region by tetraphenyl butadiene (TPB). Various thicknesses of TPB were deposited by spraying and vacuum evaporation onto specular 3M{\small\texttrademark}-foil and diffuse Tetratex{\small\textregistered} (TTX) substrates. Light yields of each reflector and TPB coating combination were compared. Reflection coefficients of TPB coated reflectors were independently measured using a spectroradiometer in a wavelength range between 200 and 650 nm. WLS coating on the PMT window was also studied. These measurements were used to define the parameters of the light reflectors of the ArDM experiment. Fifteen large $120\times 25$ cm${}^2$ TTX sheets were coated and assembled in the detector. Measurements in argon gas are reported providing good evidence of fulfilling the light collection requirements of the experiment.

21 pages, 17 figures

References in corpus (2)

• First results from a Dark Matter search with liquid Argon at 87 K in the Gran Sasso Underground Laboratory
• Luminescence quenching of the triplet excimer state by air traces in gaseous argon

Cited by in corpus (24)

• Liquid noble gas detectors for low energy particle physics
• First operation of a double phase LAr Large Electron Multiplier Time Projection Chamber with a two-dimensional projective readout anode
• Advances in Cryogenic Avalanche Detectors
• The ArDM Liquid Argon Time Projection Chamber at the Canfranc Underground Laboratory: a ton-scale detector for Dark Matter Searches
• ArDM: a ton-scale LAr detector for direct Dark Matter searches
• Radiopurity control in the NEXT-100 double beta decay experiment: procedures and initial measurements
• Wavelength shifters for applications in liquid argon detectors
• Calorimetry for low-energy electrons using charge and light in liquid argon
• ArDM: first results from underground commissioning
• First operation and performance of a 200 lt double phase LAr LEM-TPC with a 40x76 cm^2 readout
• SiPMs coated with TPB : coating protocol and characterization for NEXT
• Argon Purification Studies and a Novel Liquid Argon Re-circulation System
• Wavelength-Shifting Performance of Polyethylene Naphthalate Films in a Liquid Argon Environment
• First operation and drift field performance of a large area double phase LAr Electron Multiplier Time Projection Chamber with an immersed Greinacher high-voltage multiplier
• Studies of a three-stage dark matter and neutrino observatory based on multi-ton combinations of liquid xenon and liquid argon detectors
• Study of nuclear recoils in liquid argon with monoenergetic neutrons
• Development of a novel, windowless, amorphous selenium based photodetector for use in liquid noble detectors
• Development and characterization of a slow wavelength shifting coating for background rejection in liquid argon detectors
• Study of infrared scintillations in gaseous and liquid argon - Part II: light yield and possible applications
• Future liquid Argon detectors
• Towards a liquid Argon TPC without evacuation: filling of a 6 m^3 vessel with argon gas from air to ppm impurities concentration through flushing
• Development of a high-light-yield liquid argon detector using tetraphenyl butadiene and silicon photomultiplier array
• Measurement of photoelectron yield of the prototype for the CDEX-10 liquid argon detector
• NEXT-DEMO: a prototype for the NEXT experiment