paper

An Imaging Fabry-Perot System for the Robert Stobie Spectrograph on the Southern African Large Telescope

arXiv:0710.3750 · doi:10.1088/0004-6256/135/5/1825

Abstract

We present the design of the Fabry-Perot system of the Robert Stobie Spectrograph on the 10-meter class Southern African Large Telescope and its characterization as measured in the laboratory. This system provides spectroscopic imaging at any desired wavelength spanning a bandpass 430 - 860 nm, at four different spectral resolving powers ranging from 300 to 9000. Our laboratory tests revealed a wavelength dependence of the etalon gap and parallelism with a maximum variation between 600 - 720 nm that arises because of the complex structure of the broadband multi-layer dielectric coatings. We also report an unanticipated optical effect of this multi-layer coating structure that produces a significant, and wavelength dependent, change in the apparent shape of the etalon plates. This change is caused by two effects: the physical non-uniformities or thickness variations in the coating layers, and the wavelength dependence of the phase change upon refection that can amplify these non-uniformities. We discuss the impact of these coating effects on the resolving power, finesse, and throughput of the system. This Fabry-Perot system will provide a powerful tool for imaging spectroscopy on one of the world's largest telescopes.

17 pages, 14 figures, accepted for publication in The Astronomical Journal

References in corpus (2)

Cited by in corpus (13)