Internal states of model isotropic granular packings. III. Elastic properties
arXiv:0705.3198 · doi:10.1103/PhysRevE.76.061304
Abstract
In this third and final paper of a series, elastic properties of numerically simulated isotropic packings of spherical beads assembled by different procedures and subjected to a varying confining pressure P are investigated. In addition P, which determines the stiffness of contacts by Hertz's law, elastic moduli are chiefly sensitive to the coordination number, the possible values of which are not necessarily correlated with the density. Comparisons of numerical and experimental results for glass beads in the 10kPa-10MPa range reveal similar differences between dry samples compacted by vibrations and lubricated packings. The greater stiffness of the latter, in spite of their lower density, can hence be attributed to a larger coordination number. Voigt and Reuss bounds bracket bulk modulus B accurately, but simple estimation schemes fail for shear modulus G, especially in poorly coordinated configurations under low P. Tenuous, fragile networks respond differently to changes in load direction, as compared to load intensity. The shear modulus, in poorly coordinated packings, tends to vary proportionally to the degree of force indeterminacy per unit volume. The elastic range extends to small strain intervals, in agreement with experimental observations. The origins of nonelastic response are discussed. We conclude that elastic moduli provide access to mechanically important information about coordination numbers, which escape direct measurement techniques, and indicate further perspectives.
Published in Physical Review E 25 pages
References in corpus (10)
- Jamming at Zero Temperature and Zero Applied Stress: the Epitome of Disorder
- On the Rigidity of Amorphous Solids
- Hypoconstrained Jammed Packings of Nonspherical Hard Particles: Ellipses and Ellipsoids
- Internal states of model isotropic granular packings. I. Assembling process, geometry and contact networks
- Elastic wave propagation in confined granular systems
- Quasistatic rheology and the origins of strain
- Internal states of model isotropic granular packings. II. Compression and pressure cycles
- Stability, bifurcation, and softening in discrete systems: A conceptual approach for granular materials
- Quasi-rigidity: some uniqueness issues
- Anisotropic elastic theory of preloaded granular media
Cited by in corpus (28)
- A coordination-based approach to elasticity of floppy and stiff random networks
- Internal states of model isotropic granular packings. I. Assembling process, geometry and contact networks
- Pore-scale modeling of fluid-particles interaction and emerging poromechanical effects
- Scaling of phononic transport with connectivity in amorphous solids
- Investigation of cyclic liquefaction with discrete element simulations
- Computer simulation of model cohesive powders: Plastic consolidation, structural changes and elasticity under isotropic loads
- Internal states of model isotropic granular packings. II. Compression and pressure cycles
- Small Solar System Bodies as granular media
- Solid behavior of anisotropic rigid frictionless bead assemblies
- On the elastic moduli of three-dimensional assemblies of spheres: characterization and modeling of fluctuations in the particle displacement and rotation
- Beyond linear elasticity: Jammed solids at finite shear strain and rate
- Dynamic induced softening in frictional granular material investigated by DEM simulation
- Softening of Granular Packings with Dynamic Forcing
- Multi-directional behavior of granular materials and its relation to incremental elasto-plasticity
- Compaction of mixtures of rigid and highly deformable particles: a micro-mechanical model
- Shear response of granular packings compressed above jamming onset
- On the dependence of the avalanche angle on the granular layer thickness
- Dense granular flow at the critical state: maximum entropy and topological disorder
- Mechanical properties of inclined frictional granular layers
- Mechanical response of an inclined frictional granular layer approaching unjamming
- Reduction of the bulk modulus with polydispersity in non-cohesive granular solids
- Shear hardening in frictionless amorphous solids near the jamming transition
- Stiffness pathologies in discrete granular systems: bifurcation, neutral equilibrium, and instability in the presence of kinematic constraints
- Influence of Rotations on the Critical State of Soil Mechanics
- Oscillatory Instabilities in 3-Dimensional Frictional Granular Matter
- Quasi-static loading of granular media as a linear complementarity problem
- Polygons vs. clumps of discs: a numerical study of the influence of grain shape on the mechanical behaviour of granular materials
- Méthodes quasi-statiques pour la simulation numérique discrète des assemblages granulaires