output
20072024
most citedEuclid. II. The VIS Instrument

103 citations

7 papers

astro-ph.IM2024★ 103 cited

Euclid. II. The VIS Instrument

Euclid Collaboration, M. S. Cropper, A. Al-Bahlawan +432

This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.5…

cs.RO2022★ 1 cited

Effect of boundary conditions on a high-performance isolation hexapod platform

Alessandro Stabile, Vladimir V. Yotov, Guglielmo S. Aglietti +2

Isolation of spacecraft microvibrations is essential for the successful deployment of instruments relying on high-precision pointing. Hexapod platforms represent a promising soluti…

astro-ph.IM2013★ 20 cited

Digging supplementary buried channels: investigating the notch architecture within the CCD pixels on ESA's Gaia satellite

G. M. Seabroke, T. Prod'homme, N. J. Murray +5

The European Space Agency (ESA) Gaia satellite has 106 CCD image sensors which will suffer from increased charge transfer inefficiency (CTI) as a result of radiation damage. To aid…

cs.NI2012★ 11 cited

Investigating operation of the Internet in orbit: Five years of collaboration around CLEO

Lloyd Wood, Will Ivancic, Wes Eddy +3

The Cisco router in Low Earth Orbit (CLEO) was launched into space as an experimental secondary payload onboard the UK Disaster Monitoring Constellation (UK-DMC) satellite in Septe…

astro-ph.IM2011★ 5 cited

Taking Saratoga from Space-Based Ground Sensors to Ground-Based Space Sensors

Lloyd Wood, Charles Smith, Wesley M. Eddy +2

The Saratoga transfer protocol was developed by Surrey Satellite Technology Ltd (SSTL) for its Disaster Monitoring Constellation (DMC) satellites. In over seven years of operation,…

astro-ph.IM2010★ 4 cited

Modelling Gaia CCD pixels with Silvaco 3D engineering software

G. M. Seabroke, T. Prod'homme, G. Hopkinson +3

Gaia will only achieve its unprecedented measurement accuracy requirements with detailed calibration and correction for radiation damage. We present our Silvaco 3D engineering soft…